Product ID:RTV108 5P1
MSDS Date:05/03/1990
FSC:8030
NIIN:00F008513
MSDS Number: BGYDC

GENERAL ELECTRIC CO/SILICONE PRODUCTS DIV

260 HUDSON RIVER RD
WATERFORD, NY 12188
US

Emergency Phone: 518 237-3330

Info Phone: 518 237-3330

Preparer: DA POLSINELLI

Cage: 01139

GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT

WATERFORD, NY 12188 US

Telephone: 518-237-3330/800-332-3390

Cage: 01139

TRADE SECRET COMPONENT

Fraction By Weight: 11.1%

BROMOCHLOROMETHANE, CHLOROBRMOMETHANE

CAS: 74-97-5

RTECS: PA5250000

OSHA PEL 1050 MG/CUM

ACGIH TLV: 1060 MG/CUM

ETHANE, 1-CHLORO-1,1-DIFLUORO-, CHLORODIFLUOROETHANE (DOT),

CAS: 75-68-3

RTECS: KH7650000

METHYLTRIACETOXYSILANE, ALKYL TRIACETOXY SILANE

CAS: 4253-34-3

RTECS: VV4500000

Fraction By Weight: 5-10%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM

TRADE SECRET COMPONENT

Fraction By Weight: 10.6%

LD50 LC50 Mixture:ORAL LD50: 25,000 MG/KG (RAT)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION. INHALATTION:
RESPIRATORY, MOUTH, NOSE & THROAT IRRITATION. LIPS/GUMS/TONGUE:
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: IRRITATION. INHALATION: RESPIRATORY,
MOUTH, NOSE & THROAT IRRITATION. LIPS/GUMS/TONGUE: IRRITATION.

First Aid:SKIN: CLEAN COMPLETELY WITH DRY CLOTH OR PAPER TOWEL BEFORE
WASHING W/DETERGENT & WATER. INHALATION: REMOVE TO FRESH AIR. EYES:
FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES. OBTAIN MEDICAL
ATTENTIO N IN ALL CASES.

Flash Point Method:PMCC
Flash Point:210F
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA

Spill Release Procedures:WIPE, SCRAPE OR SOAK UP IN AN INERT MATERIAL &
PUT IN A CONTAINER FOR DISPOSAL. WASH WALKING SURFACES W/DETERGENT
& WATER TO REDUCE SLIPPING HAZARD. WEAR PROPER PROTECTIVE
EQUIPMENT. DON'T PUNCTURE OR INCINERATE CONTAINER. CONTENTS UNDER
PRESSURE.

Handling and Storage Precautions:PRODUCT RELEASES ACETIC ACID DURING
APPLICATION & CURING. USE ONLY IN WELL VENTILATED AREA. REMOVE
CONTACT LENSES BEFORE USING SEALANT.
Other Precautions:AVOID CONTACT W/SKIN & EYES. DON'T HANDLE LENSES
UNTIL ALL SEALANT HAS BEEN CLEANED FROM THE FINGERTIPS, NAILS &
CUTICLES. RESIDUAL SEALANT MAY REMAIN ON FINGERS FOR SEVERAL DAYS &
TRANSFER TO LENSES.

Ventilation:MECHANICAL VENTILATION TO KEEP Protective Gloves:CLOTH
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE WASH STATIONS
Supplemental Safety and Health

Spec Gravity:1.1
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:INSOLUBLE
Appearance and Odor:TRANSLUCENT PASTE, ACETIC ACID ODOR
Percent Volatiles by Volume:<5%

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT OR TEMPERATURES >120
F.
Hazardous Decomposition Products:SILICONE DIOXIDE, ACETIC ACID

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. BURY IN A LICENSED LANDFILL ACCORDING TO
FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.